Anonymizing proxy wireless access point for the Raspberry Pi/Pi2/Pi3.
SD Card Image with Noobs - New Out Of the Box Software - an easy operating system install manager for the Raspberry Pi.
976 Item Items
Warning: Last items in stock!
Turn your Raspberry Pi into an anonymizing proxy wireless access point.
Browse anonymously anywhere you go with the Onion Pi Tor proxy. Setting it up is very easy. A script will ask you a few questions (the name of your new TOR access point, the IP range you desire to use) detect the driver for your wifi dongle and in a few minutes create a new secure wireless access point. Connecting to that access point will automatically route any web browsing from your computer through the anonymizing Tor network, no need to setup any proxy configuration on your device or browser!
To use this image you will need:
• A Raspberry Pi, model B, B+, Pi2 or Pi3.
• A boot SD card for the Raspberry Pi.
• A USB WiFi dongle that supports "Access Point" mode (not required with the Pi3).
• An Ethernet cable to connect to the Internet.
This project does not require any coding or compilation. Very basic Linux and networking knowledge would be useful, but is not essential.
This image was tested with the popular and cheap wifi dongles Realtek 8188CUS and the Ralink RT5370 that you can buy on ebay for less than $9.00.
To know which wifi dongle you have simply type on the terminal the command "lsusb" to obtain a list of all usb connected devices and you will read
something like this:
Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Attention: this image requires a wifi dongle that supports "Access Point" mode. If you are not sure if your Wifi dongle supports this mode then please do not buy this image.
Please understand we cannot support or troubleshoot your specific wifi dongle, nor provide support for your specific custom configurations. We do provide some basic troubleshooting and configuration instructions with this image.
Please note: This is not a physical SD card, this is a preconfigured SD Card Image that you can download and install on the SD card of your choice. The operating systems used and the software provided are Free Open Source.